A can of sugar is shown with the lid open.

Ceralene® Waxes

For different kinds of technical applications

  • Colour masterbatches (dispersing additive)
  • PVC (ext. release, surface improvement, int./ext. lubricant)
  • Technical plastics (flow/surface improvement, mould release)
  • Additive masterbatches (dispersing additive, compatibilizer)
  • Duroplasts (flow, levelling, pigment dispersion)
  • Pigment and fillers (surface coating)
  • Rubber processing (release)
  • Powder coatings (flow/levelling/scratch resistance)
  • Bitumen
  • Hot melt adhesives
  • Aqueous and solvent-based coating systems
  • Toner
  • Also for cosmetic applications

Status under food legislation

FDA/BfR and Regulation (EU) No. 10/2011 on request.

Ceralene® Types for a Broad Range of Industrial Applications

Benefits

  • Plasticizing viscosity reduction
  • Internal/external lubrication
  • Reduced energy input/friction slip and anti-blocking effect
  • Improved wetting of pigments, fillers and fibres

Survey About Ceralene® Types

For different kinds of technical applications

CERALENE® grade Wax Type Appearance Density (at 23 °C) g/cm3 Drop Point °C Viscosity (at120 °C) mPa • s Penetration (at 25 °C) mm • 10-1 Acid Value mg KOH/g
1XLDPEWhite Prills0.9210217040
1MLDPEWhite Prills0.9210424030
2ELDPEWhite Prills0.9210655020
2GLDPEWhite Prills0.9310914030
2TLDPEWhite Prills0.921091.120
120/200HDPEAlmost White Prills0.96122200*< 10
120HDPEAlmost White Prills0.96122400*< 10
120/800HDPEAlmost White Prills0.96122800*< 10
882PolyolefinAlmost White Prills0.92146175**20
885PolyolefinAlmost White Prills0.91150225**< 10
850PPAlmost White Prills0.915280**< 10
691Polyester mod.White Prills0.9770130310
692CPolyester mod. cosmetic gradeWhite Prills0.9760300512
693Polyester mod.White Prills0.9770300316
694Polyester mod.White Prills0.9770170319
CP15MPolar copolymerOff-white Prills0.93103500417
CP30MPolar copolymerOff-white Prills0.9398500528
CP45MPolar copolymerOff-white Prills0.9398600737
CP12HPolar copolymerOff-white Prills0.95122800112
CP14PPolar copolymerOff-white Prills0.91152150**< 313

* at T=140 °C, ** at T=170 °C

CERALENE® GRADE MASTERBATCH TECHNICAL RESINS PVC WOOD/FIBRE-PLASTIC COMPOSITES BITUMEN HOTMELT ADHESIVE POWDER COATINGS SOLVENT BASED FORMULATIONS (SLIP ABRASION RESISTANCE) WATER BASED ADDITIVES (SURFACE MODIFICATION)
1XOO=+OO 1)
1MO=+=++ 1)
2E=++=++=++=+=+ 1)
2GO=++
2T=++O=+=++=++O 1)
120/200O=++=+
120OO=++=+
120/800=+O=++=+
882=++O=+O
885=+=+O
850=++=++=++=++O
691=++=++=+=++=+=++
692C
693=++=++=++=++=+=++
694=++=++=++=++=+=++
CP15M=++=++=++=++=++=++
CP30M=++=++=++=++=++=++=+
CP45M=++=++=++=++=++=++=++
CP12H=++=++=++=++=++=++=++
CP14P=+=++=++=+=+=++

O suitable + recommended ++ specially recommended

1) inks

Synthetic CERALENE® polyester waxes

CERALENE® GRADE DROP POINT (°C) ACID VALUE MG KOH/G VISCOSITY (AT 120 °C)MPA • S
6917010130
6937016300
6947019170

CERALENE® CP15M, CP30M and CP45M

Polar copolymer wax

  • As dispersing additive in colour masterbatches (e.g. for PP, PA, PE, PS, PC or ABS)
  • In PVC as internal lubricant
  • As compatibilizer between polar and non-polar resins as well as for fibres/fillers
  • In hot melt applications / as an adhesion promotor

CERALENE® 850

PP homopolymer wax

  • As dispersing additive for PP masterbatches, especially PP fibre masterbatches
  • As an additive for toner production
  • Hot melt applications

CERALENE® waxes for plunger lubrication

Use as high-performance plunger lubricant for aluminum die-casting machines.

CERALENE® Drop Point (°C) Acid Value mg KOH/g Viscosity (at 120 °C)mPa • s
6917010130
6937016300
6947019170